LAN Network Line Finder

NZ$864.25 NZ$432.12

Multifunctional LCD Display LAN Network Line Finder Wire Cable Tester Test Tool

The network tester is designed to quickly test the continuity of the cable through an automatic scan cable. The cable can be easily tested before and after cable installation, making it easy to use and quick to test.


  • In the calibration mode, the lenh unit can be converted between meter and feet.
  • If the cable tester is not used within 10 minutes, it will automatically shut down.
  • The up and down selection keys are located on the left side of the tester for easy operation.
  • Portable, lightweight and easy to carry, suitable for testing the lenh of the wire and finding the breakpoint.
  • Simple and easy to use, the wiring diagram is displayed on the LCD screen, making the test results clear at a glance.
  • Detectable wiring faults include break position, open circuit, short circuit and misalignment.
  • Test line type: RJ45 twisted pair for UTP and FTP; with conversion line tester RJ11 interface, telephone line (TEL) and coaxial cable (BNC).

Condition: 100% Brand New
Material: Plastic
Tester Port: RJ45
Power Supply: 4 x AAA Batteries (Not Included)
Display: Large Screen LCD
Working Environment Temperature: -10℃-+60℃
Type of Test Cable: STP/UTP twin twisted cable, coaxial cable, telephone line
Tester Port: Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R). The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line.
Lenh Measurement of Twin Twisted Cable:
Scope: 1  350M (3  1,200ft)
Calibration Accuracy: 3% (+/-0.5m or +/-1.5ft) (Calibrating Cable &;5M)
Shipment Accuracy: 5% (+/-0.5m or +/-1.5ft) (AMP, Class 5 Cable)
Display: M or ft.
Lenh Calibration: User can set calibration factor by himself with a given lenh cable. The lenh of calibrating cable is more than 5M.
Wire Sequence and Locating Cable Error: Check errors such as open circuit, short circuit, reverse connection, crossover or crosstalk interference.
Locating Cable: 8 far-end passive test jacks (ID1 ≥ ID8)
Package Size: Approx. 180 x 80 x 40 mm / 7.1 x 3.1 x 1.6 in

Package List:
1 x Generator
1 x Receiver
1 x User Manual

Please kindly note that the battery is not included.

Recently Viewed Products